Skip Ribbon Commands
Skip to main content
SharePoint

6A45.u2 - Collimator Model

The Web Part cannot find an InfoPath form in the specified location. Either the location does not have an InfoPath form associated with it or it is on a different site collection. Modify the Web Part Properties and select a list or library on the current site.

​6A45.u2 - Collimator Model

Preview
SelectSelected
Title6A45.u2 - Collimator Model
Objective

​To demonstrate how a collimator takes an incoming signal and produce parallel rays of an outgoing signal, in this case light.

StatusAvailable
Assembly Instructions

Place the collimator model in front of an incandescent light bulb.  Place a camera on the other side of the collimator and image the area where the collimated light comes through.  ​

Setup Time5
Operation Time5
Preview Time5
Operation Instructions

Turn on the light bulb and view the collimated light with the camera.  Then turn out the lights and see how that compares with the image with the lights off.​

ExportableYes
Demo on DimeNo
PIRA 200No
Export Instructions (if different)
HazardsNone
Analysis/Information
Category6 Optics
Subcategory6A - Geometrical Optics
Keywordscollimation, collimator, parallel rays, light, model
Construction Information
 
Equipment TitleUse SHIFT+ENTER to open the menu (new window).
  
QuantityUse SHIFT+ENTER to open the menu (new window).
  
light collimator - straws
1
light bulb - 100W
1
wooden block
1
switch - on/off with power outlet
1
camera - b&w
1