Skip Ribbon Commands
Skip to main content
SharePoint

5N10.63 - Voltage Reading of Polarized Radio Waves - Solid States

The Web Part cannot find an InfoPath form in the specified location. Either the location does not have an InfoPath form associated with it or it is on a different site collection. Modify the Web Part Properties and select a list or library on the current site.

​5N10.63 - Voltage Reading of Polarized Radio Waves - Solid States

Preview
SelectSelected
Title5N10.63 - Voltage Reading of Polarized Radio Waves - Solid States
Objective

​To demonstrate how much voltage is present on a polarized radio wave using the uhf solid state transmitter

StatusAvailable
Assembly Instructions

Connect the transmission antenna to the uhf transmitter.  Plug the transmitter into an on/off switch.  Connect a projection voltmeter to the receiving antenna with banana plug inputs.  Provide the reflection bar.  Tape down the banana leads with blue tape so the meter does not move from its position when the professor is using the receiver for imaging purposes.​

Setup Time5
Operation Time5
Preview Time5
Operation Instructions

Turn on the uhf transmitter.  With the receiver parallel to the transmitter, observe the reading on the voltage meter.  When the receiver is perpendicular, watch the voltage go to zero.​

ExportableNo
Demo on DimeNo
PIRA 200No
Export Instructions (if different)
HazardsNone
Analysis/Information
Category5 Electricity and Magnetism
Subcategory5N - Electromagnetic Radiation
Keywordspolarization, polarized, radio waves, voltage output
Construction Information
 
Equipment TitleUse SHIFT+ENTER to open the menu (new window).
  
QuantityUse SHIFT+ENTER to open the menu (new window).
  
uhf generator - solid state
1
switch - on/off with power outlet
1
voltmeter - 10VDC, 100VDC
1
transmission antenna loop - with banana plugs
1
receiving antenna with banana plug inputs
1
banana cable
2
camera - b&w
1
reflection bar
1
1