Skip Ribbon Commands
Skip to main content
SharePoint

3A10.30 - Torsion Pendulum

The Web Part cannot find an InfoPath form in the specified location. Either the location does not have an InfoPath form associated with it or it is on a different site collection. Modify the Web Part Properties and select a list or library on the current site.

​3A10.30 - Torsion Pendulum

Preview
SelectSelected
Title3A10.30 - Torsion Pendulum
Objective

Demonstrate simple harmonic motion with a torsion pendulum.

StatusAvailable
Assembly Instructions

Instructions
The torsion pendulum consists of an 8" steel disc with a reference line along one radius. The disc is clamped at its center to a stiff wire (torsion rod) which is clamped on the top to a support rod. The torsion rod can be varied. There is also a steel rig which can be set down on the rotating disc to increase its moment of inertia.

Setup Time20
Operation Time3
Preview Time6
Operation Instructions
ExportableNo
Demo on DimeNo
PIRA 200No
Export Instructions (if different)
HazardsNone
Analysis/Information
Category3 Oscillations
Subcategory3A - Oscillations
Keywordsshm, twist, twisting pendulum
Construction Information
 
  
  
torsion rod
1
pendulum torsion rod clamp
1
pendulum torsion disk
1
pendulum torsion ring
1
bench rod
1
bench clamp
1
rod clamp
1
rod - short
1